 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD April 2006 FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Features Three 6 order video anti-aliasing or reconstruction filters Supports Component YPrPb or RGB video Three channels selectable to 8MHz,16MHz, 32MHz for SD/ PS/HD applications Includes wide bandwidth bypass mode 6dB gain option available for 150, doubly terminated video load 0dB gain option available for high-impedance loading Selectable Clamp or Bias mode on Pb,Pr / B,R inputs Inputs and outputs can be either AC or DC coupled DC-coupled outputs eliminate expensive coupling capacitors Output Disable 5V Only 2kV CDM / 8kV HBM ESD protection Lead (Pb) Free packages - TSSOP-14 th Description The FMS6203 offers comprehensive filtering for set top box or DVD applications. It is intended to replace passive LC filters and drivers with a low-cost integrated device. Filter channels are specialized for either component (YPbPr) or RGB video signals. These channels offer selectable frequency response of 8, 16, or 32MHz. The filters can also be bypassed for high-frequency operation. Additional functionality of these channels include input biasing mode and output disable. The FMS6203 may be driven directly by a DC-coupled DAC output or an AC-coupled signal. All inputs accept standard 1Vpp video signals. Each channel includes an output amplifier capable of driving a single (150), AC or DC-coupled video load. All outputs can be disabled to save power in DC coupled applications. The device is available in two factory set options, a 0dB gain option and a 6dB gain option. Applications Cable and Satellite set top boxes DVD players HDTV Personal Video Recorders (PVR) Video On Demand (VOD) Functional Block Diagram Y/G In Clamp SD PS HD BP Y/G Out Pb/B In Bias Pr/R In FSEL0 FSEL1 OE Clamp / Bias SD PS HD BP Pb/B Out Clamp / Bias SD PS HD BP Pr/R Out Factory Option 0dB or 6dB Gain (c)2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com FMS6203 Rev. 1A FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Ordering Information Part Number FMS6203MTC1400 FMS6203MTC1400X FMS6203MTC1406 FMS6203MTC1406X Gain Setting 0dB 0dB 6dB 6dB Package TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14 Pb-Free Yes Yes Yes Yes Operating Temperature Range 0C to 85C 0C to 85C 0C to 85C 0C to 85C Packing Method Tube Tape and Reel Tube Tape and Reel Moisture sensitivity level for all parts is MSL-1. Pin Configuration VCC Fsel0 Y/G In Pb/B In Pr/R In BIAS GND 1 2 3 4 14P TSSOP FAIRCHILD FMS6203 14 13 12 11 10 9 8 VCC Fsel1 Y/G Out Pb/B Out Pr/R Out OE GND 5 6 7 Pin Assignments Pin# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin VCC FSEL0 Y/G In Pb/B In Pr/R In BIAS GND GND OE Pr/R Out Pb/B Out Y/G Out FSEL1 VCC Type Input Input Input Input Input Input Input Input Input Output Output Output Input Input +5V supply Description Selects filter corner frequency Selectable video input Selectable video input Selectable video input Input Bias on Pb/B Pr/R 0=Bias 1=Clamp Must be tied to ground. Do not float. Must be tied to ground. Do not float. Output disable control 0=On 1=Off Filtered SD,PS,HD,BP video output Filtered SD,PS,HD,BP video output Filtered SD,PS,HD,BP video output Selects filter corner frequency +5V supply 2 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Absolute Maximum Ratings The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table defines the conditions for actual device operation. Parameter DC Supply Voltage Analog and Digital I/O Output Current, Any One Channel (Do Not Exceed) Min. -0.3 -0.3 Max. 6 Vcc + 0.3 50 Unit V V mA Reliability Information Parameter Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10s) Thermal Resistance (ThetaJA) JEDEC Standard Multi-Layer Test Boards, Still Air 97 -65 Min. Typ. Max. 150 150 300 Unit C C C C/W Recommended Operating Conditions Parameter Operating Temperature Range Supply Voltage Range Min. -40 4.75 Typ. 5.0 Max. 85 5.25 Unit C V 3 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD DC Electrical Characteristics Tc = 25C, Vcc = 5V, Rsource = 37.5, inputs AC coupled with 0.1F, all outputs AC coupled with 220F into 150 loads, referenced to 400kHz; all gain options; unless otherwise noted. Symbol ICC ICC1 VIN VIL VIH TENABLE Supply Parameter Current1 No load Supply Current1 Video Input Voltage Range Digital Input Low1 Digital Input High 1 Conditions No load , Output disabled Referenced to GND if DC-coupled FSel0,FSel1 FSel0,FSel1 150 Ohm DC load Min. Typ. 36 15 1.0 Max 75 35 Units mA mA Vpp 0 2.4 300 0.8 V V ns Vcc Output Enable Time Standard Definition Electrical Characteristics Tc = 25C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5, all inputs AC coupled with 0.1F, all outputs AC coupled with 220F into 150 loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol AVSD f1dBSD fcSD fSBSD DG DP THD XTALKSD SNR tpdSD Parameter Channel Gain Error1 1 Conditions Min. -0.4 5.2 Typ. 0 7.15 8 Max 0.4 Units dB MHz MHz dB % % dB dB ns -1dB Bandwidth -3dB Bandwidth Attenuation(stopband reject)1 f = 27MHz Differential Gain Differential Phase Output Distortion Crosstalk (ch-to-ch) Signal-to-Noise Ratio2 Propagation Delay VOUT = 1.4Vpp, 3.58MHz 1 MHz NTC-7 weighting, 100kHz to 4.2MHz Delay from input to output, 4.5MHz 40 50 0.3 1.0 0.6 -70 75 85 Progressive Scan Electrical Characteristics Tc = 25C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5, all inputs AC coupled with 0.1F, all outputs AC coupled with 220F into 150 loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol AVPS f1dBSPS fcPS fSBPS THD XTALKPS SNR tpdPS Parameter Channel Gain Error1 -1dB Bandwidth -3dB Bandwidth Attenuation(stopband Output Distortion Crosstalk (ch-to-ch) Signal-to-Noise Ratio2 Propagation Delay reject)1 f = 54MHz 1 Conditions Min. -0.4 10 Typ. 0 13.5 16 Max 0.4 Units dB MHz MHz dB % dB dB ns 37 44 0.55 -75 66 47 VOUT = 1.4Vpp, 7MHz 1 MHz Unweighted; 100kHz to 15MHz Delay from input to output, 10MHz Notes: 1. 100% tested at 25C 2. SNR = 20 * log (714mV / rms noise) 4 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD High Definition Electrical Characteristics Tc = 25C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5, all inputs AC coupled with 0.1F, all outputs AC coupled with 220F into 150 loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol AVHD f1dBHD fcHD fSBHD THD Parameter Channel Gain Error1 -1dB Bandwidth1 -3dB Bandwidth Attenuation(stopband reject)1 f = 74.25MHz Output Distortion Conditions Min. -0.4 28 Typ. 0 31 32 Max 0.4 Units dB MHz MHz dB % % dB dB dB ns 30 40 0.5 0.5 -75 -57 66 25 VOUT = 0.7Vpp, 22MHz ; 0dB ; 10k load VOUT = 1.4Vpp, 22MHz ; 6dB ; 150 load 1 MHz 30 MHz 2 XTALKHD SNR tpdHD Crosstalk (ch-to-ch) Signal-to-Noise Ratio Propagation Delay Unweighted, 100kHz to 30MHz Delay from input to output, 20MHz Bypass Mode Electrical Characteristics Tc = 25C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5, all inputs AC coupled with 0.1F, all outputs AC coupled with 220F into 150 loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol AVBP f1dBBP fcBP THD Parameter Channel Gain Error -1dB Bandwidth -3dB Bandwidth Output Distortion 1 Conditions DC Min. -0.4 Typ. 0 90 115 Max 0.4 Units dB MHz MHz % % dB dB dB VOUT = 0.7Vpp, 22MHz ; 0dB ; 10k load VOUT = 1.4Vpp, 22MHz ; 6dB ; 150 load 1 MHz 30 MHz 2 0.3 0.25 -74 -64 70 XTALKBP SNR Crosstalk (ch-to-ch) Signal-to-Noise Ratio Unweighted, 100kHz to 30MHz Notes: 1. 100% tested at 25C 2. SNR = 20 * log (714mV / rms noise) Frequency Select Truth Table FSEL1 0 0 1 1 FSEL0 0 1 0 1 Filter Freq 8MHz 16MHz 32MHz Bypass Video Format SD,480i PS,480p HD,1080i,720p - Sync Format Bi-level, 4.7s pulse width Bi-level, 2.35s pulse width Tri-level, 589ns pulse width - 5 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Mechanical Dimensions 14-Lead (TSSOP) 6 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST(R) ActiveArrayTM FASTrTM BottomlessTM FPSTM Build it NowTM FRFETTM CoolFETTM GlobalOptoisolatorTM CROSSVOLTTM GTOTM DOMETM HiSeCTM EcoSPARKTM I2CTM E2CMOSTM i-LoTM EnSignaTM ImpliedDisconnectTM FACTTM IntelliMAXTM FACT Quiet SeriesTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM DISCLAIMER ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UltraFET(R) UniFETTM VCXTM WireTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 7 FMS6203 Rev. 1A www.fairchildsemi.com |
Price & Availability of FMS6203MTC1400X
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |